For over 10 years, FAST™ has been recognized as the leading developer of advanced electronic fuel injection technology. Our engineers have ignited new sparks never before seen in the EFI performance aftermarket year after year. With technical assistance that is beyond comparison, FAST™ has been able to build close relationships with customers. Many of these relationships have helped our Research & Development team stay on top simply by listening to the needs of our customers.
In 2001, FAST™ became a member of the COMP Performance Group™, gaining a larger source of technological resources than ever before. This enabled the fuel injection innovator to conduct more extensive R&D efforts with a larger team of engineers, which ultimately led to even more discoveries in computer-controlled horsepower.
Today, FAST™ continues to drive the aftermarket industry through constant new product development. And with a complete line of superior, easy-to-use EFI systems, intake manifolds, throttle bodies and other EFI components, FAST™ is committed to bringing the best fuel injection experience to both racers and street enthusiasts everywhere.
This weekend, we have deep discounts on both the FAST XFI Complete systems, as well as EZ EFI conversion kits. Check them out HERE!
This weeks’ special is Bullet series pistons from CP. Type in the coupon code “bullet” when placing your order and recieve $25 off on a set of Bullet Pistons.
Offer valid online only. Sale from 12:01 AM Friday 5/7/2010- 11:59 PM Sunday 5/9/2010. Not valid on any other products.
If you are looking to tune up your car or truck or boat for optimal performance, look no further than FAST’s line of digital air fuel meters. The engineers at fast have done a great job developing this line of air / fuel meters including setups for ethanol and diesel.
With no laptop required, FAST™ has developed three simple, easy-to-use air/fuel meters for gasoline, diesel and ethanol/methanol (E85) fuels. Available in single or dual sensor units, these meters give tuners the power to read two wide-band O2 sensors individually or average them together for maximum accuracy of the engine’s air/fuel ratio reading. The FAST™ Air/Fuel Meters include several enhanced capabilities, including the built-in data logging capability that plays back recorded information on a lighted, full graphical display screen rather than using a laptop computer. Additional features include outputs for external data loggers, digital gauges, as well as a narrowband simulator function that allows you to feed your engine’s computer a factory signal while using the wide-band sensor for air/fuel measurement.
Competition Components offers all of these FAST air Fuel meters, as well as a full line of FAST accessories. Product listing here
Edelbrock is offering a rebate on cylinder heads from April 15, 2010 – June 30th, 2010. Simply purchase a pair of heads, download this rebate form, and recieve a $50 check and two Edelbrock T-shirts. In addition, for the same time period, we will give a $50 discount when you have us CNC port your heads. Purchase any Edelbrock ported head package and enter the coupon code “cnc” during checkout to recieve this $50 discount.
Performance leader adds new 15W50 lubricant designed specifically for use by professional engine builders during break-in of new and rebuilt engines With the current government regulations, today’s oils are missing many of the critical ingredients needed for engine protection. Engine builders and performance hobbyists are being forced to add extra protection additives in order to maintain engine safety and performance – but not anymore.
Engineers at COMP Cams® and Endure Performance Lubricants™ have expanded their line of automotive lubricants to include 15W50, as well as the original 10W30, weight oils. Both popular weights are ZDDP-fortified to provide maximum protection during initial break-in. Heavily tested and proven by the COMP Cams® R&D team, these advanced lubricants deliver maximum engine life. They do so by improving the surface mating of valve train components (especially flat tappets), rotating assembly, rod journals, piston rings, valve guides and other vital areas of the engine. The proprietary formulas of both the 15W50 and 10W30 oils include optimum amounts of critical additives ZDDP (Zinc & Phosphorus), Molybdenum, detergents and high grade base oil.
The mineral-based COMP Cams® Engine Break-In Oils are fully-formulated and require no additives or supplements. In addition, both popular weights are fully compatible with gasoline, methanol and high octane racing fuels.
We have added the entire line of PAC Beehive Springs to the site. PAC is a division of Peterson Spring , which has been manufacturing valve springs since 1914 Right here in the United States. Their quality is second to none, and we have great prices on them. Check out the beehive springs here. We have used many of these beehive springs on flat tappet and hydraulic roller engine combinations with great success.
Due to our increased volume with our Brad Penn distributor, we are able to offer additional discounts on the famous “green oil”. We have had great success with all of their oils, but the break in oil is top notch. We highly recommend it for all flat tappet cam engines, and it’s non detergent formula helps quickly seat the rings on roller cam engines as well. Check out our Brad Penn products.
Diamond Pistons has introduced an ambitious new formula—a notable step forward in piston performance—the Diamond double-coat.
By combining hard-coat anodizing with a moly-skirt coating, Diamond’s double-coat pistons will benefit all engines but is particularly useful in power-adder applications.
Features:
• Provides a thermal barrier and increases both corrosion-resistance and wear-resistance
• Deters piston rings from micro welding themselves to the ring grooves and it creates an excellent adhesion surface
• Resists high cylinder temperatures and pressures and frees-up a little more power; baked-on molybdenum dry-film lubricant skirt coating adds an anti-friction anti-scuffing surface
• Increases machined clearances of about .002-inch on the piston diameter and also on the width and depth of the ring grooves to compensate for the additional build-up from the anodizing process
• Includes submerging in a detergent-acid bath, followed by two rinses before the anodizing process and three rinses after
• Adds five light coats of the moly dry-film lubricant and baked in an oven for an hour.
Diamond, who has been developing and testing their double-coat procedures for over two years, conducts all their coating processes inhouse.
The turn-around time for the Diamond double-coat process is about two days and the cost is $50 per piston. Single coatings, either anodizing or moly-skirt, are still available.
Most everyone would like to have a new roller cam for their engines, but let’s face it, we don’t all have that kind of cash. A hydraulic or mechanical flat tappet is still a good alternative and can give years of trouble free service. By now, most guys in the hobby have heard of the reduced zinc content in most motor oil. This isn’t really that big of a deal. There are several additives out there that work well, and quite a few oils developed for older cars with more zinc in them. Let’s talk about a couple of keys to success in getting your camshaft broken in and happy.
It is critical for the lifters to spin freely in their bores. I ship lifters in a box with individual sleeves on them to avoid any nicks during shipment, as do most of the good suppliers . The key to successful cam break in is all in the prep work. Before I wash a block for final assembly, I use an old lifter to make sure it moves freely in all of the bores. (Both up and down as well as rotation) I also scrub them liberally with a brush during cleaning. Make sure that you have enough clearance when assembling the heads both retainer to guide as well as coil bind on the spring. This is important. A bind anywhere in the valvetrain is certain to cause trouble. Also make sure to check piston to valve clearance. It is smart to remove inner springs on mechanical cams. Lots of people don’t, but its an easy thing to do to insure the long life of your cam.
Inspect the lifters to make sure they don’t have any nicks or surface imperfections. Apply lube liberally to the cam lobes and the bottoms of the lifters only. I like to use either Gibbs assembly grease or ARP moly paste. Use oil on the sides of the lifters and journals of the cam. I use Brad Penn break-in oil on all of my engines. Joe Gibbs has a similar product as does Comp Cams now. When starting the engine the first time, you want a quick, clean start up. Bring the engine up to 2000-2500 RPM immediately and vary it in that range for 20 minutes. If it gets hot, shut it down. Just don’t let it go back to idle. It is wise to use a carburator that you know works well. I am a big fan of changing the oil right away to get rid of any contaminants and assembly lubes that may be floating around in the engine. After that, change your oil regularly with a good, high zinc content oil like the Brad Penn, or a good quality oil with an additive.
Wiping a cam has very little to do with the profile itself. Just like a good paint job, it’s all in the details during the prep work.
We have two products on sale this weekend, starting Friday 3/19/2010:
1) Brad Penn oil. By using the coupon code “bpoil” recieve an extra 5$ off per case. Now is the time to stock up on oil for the season! This offer only applies to full case quantities, and must be purchased online Coupon will be valid starting at 12:01 AM on Friday, and ends Sunday at 11:59PM. Brad Penn Products
2) Rollmaster Timing Sets: Use the coupon “rollmaster” and recieve an additional $10 off on the best timing sets available. Coupon will be valid from 12:01 AM on Friday, through 11:59 PM on Sunday. Online orders only. Rollmaster
